1.1 使用eNSP搭建网络基础 1.1 Building a Network Foundation with eNSP

  1.2 认识VRP系统 1.2 Understanding the VRP System

  1.3 VRP命令行基础 1.3 VRP Command Line Basics

  1.4 VRP基本配置 1.4 Basic VRP Configuration

  1.5 VRP文件系统 1.5 VRP File System

  1.6 常见网络通信设备介绍 1.6 Overview of common network communication devices

  2.1 交换机概述 2.1 Switch Overview

  2.2 交换机的工作原理 2.2 Working Principle of Switch

  2.3 交换机的转发方式 2.3 Switch Forwarding Methods

  2.4 MAC地址表 2.4 MAC IP address

  2.5 交换机常用的2种登录方式 2.5 Two Common Login Methods for Switches

  2.6 交换机的常用配置命令 2.6 Common Configuration Commands for the Switch

  2.7 交换机的端口安全 2.7 Switch Port Security

  2.8 上机练习 2.8 Exercise

  3.1 虚拟局域网（VLAN） 3.1 Virtual Local Area Network (VLAN)

  3.2 VLAN的基本配置 3.2 Configuration of VLAN

  3.3 VLAN中继 3.3 VLAN Trunking

  3.4 上机练习 3.4 Exercise

  4.1 STP概述 4.1 STP Overview

  4.2 生成树协议STP 4.2 Overview of Spanning Tree Protocol(STP)

  4.3 STP的配置 4.3 Configuration of STP

  4.4 快速生成树协议RSTP简介 4.4 Overview of Rapid Spanning Tree Protocol RSTP

  4.5 上机练习 4.5 Exercise

  5.1 路由的概念 5.1 Concept of Routing

  5.2 了解路由器 5.2 Understanding Routers

  5.3 路由表 5.3 Routing Table

  5.4 路由器的管理与基本配置 5.4 Router management and basic configuration

  5.5 静态路由 5.5 Static Routing

  5.6 上机练习 5.6 Exercise

  6.1 VLAN间路由的概念 6.1 Concept of Inter-VLAN Routing

  6.2 VLAN间路由的分类 6.2 Classification of Inter-VLAN Routing

  6.3 单臂路由器VLAN间路由 6.3 Single-Arm Router Inter-VLAN Routing

  6.4 三层交换机实现VLAN间路由 6.4 Layer 3 Switch Implementation of Inter-VLAN Routing

  6.5上机练习 6.5 Exercise

  7.1 路由协议概述 7.1 Overview of routing protocols

  7.2 链路状态路由协议概述 7.2 Overview of link-state routing protocols

  7.3 OSPF协议 7.3 OSPF Protocol

  7.4 OSPF与多路访问网络 7.4 OSPF and Multiple Access Networks

  7.5 多区域OSPF 7.5 Multi-area OSPF Configuration

  7.6 上机练习 7.5 Exercise

  8.1 链路聚合概述 8.1 Overview of Link Aggregation

  8.2 虚拟路由冗余协议(VRRP) 8.2 Virtual Routing Redundancy Protocol (VRRP)

  8.3 上机练习 8.3 Exercise

A total of 0 comments

A total of 0 notes